- Liittynyt
- 18 Elokuu 2014
- Viestit
- 14,327
Follow along with the video below to see how to install our site as a web app on your home screen.
Huom.: This feature currently requires accessing the site using the built-in Safari browser.
- Foot pedal - Remote current control via foot pedal(not included). The foot control mode gives you the advantage of being able to control the current even during the welding process, giving you different options for performing the welding work. No pulse function possible in pedal mode. The maximum current is set on the device. The foot pedal is set to 10. When the foot pedal is pressed, the unit ignites with a lower current than is shown on the display. As soon as the foot pedal is fully depressed, the set maximum current is reached. The value on the display does not change during this time. Examples: Maximum current display: 100 A / ignition current by pedal: approx. 40 A, Maximum current display: 150 A / ignition current by pedal: approx. 80A, Maximum current display: 200 A / ignition current by pedal: approx. 110 A
Vähän kummallinen tuo Stahwerkin selitys aiheesta, jos poljin on kytketty lähettämäni kuvan mukaan. Tai sitten jossain on 'ylimääräinen' vastus tekemässä tuon aloitusvirran. Tai vaihtoehtoisesti noiden potikat ei säädä koko aluetta. Tuossa yhdessä blogissa jonka löysin oli hiukan viitettä siitä, että säätö ei ole ehkä ihan optimaalinen: https://greasygreg.blogspot.com/2017/12/setting-up-stahlwerk-acdc-200-pulse.htmlItsellä 2+3pol, mutta käytännössä lienee täysin sama.
Nykyään Stahlwerkin sivuilla vastaavan laitteen spekseissä polkimesta:
Ja linkkaamani videon pointti tähän ketjuun liittyen oli se polkimen potikan "nollaus"
painamalla pohjaan pitäen hampaat sormella irti potikasta.
Tuossa on jo minulle hieman liikaa. Ja mahtaisko edes muovina kestää?